Transcension DMX 512 Merger

The DMX Merger merges two DMX signal inputs, to one output. Three operation modes can be selected by using the 2 dip switch setting. The three operation modes include HTP (Highest Takes Priority), Back up and Merge mode. When set to HTP mode the controller with the highest channel output setting will take priority on output. HTP is the most commonly used to controller dimmer channels. When set to the Back up mode, a controller that is connected to the "B" DMX input will be on stand by and will only take over if the controller connected to the "A" DMX input fails. When set to Merge mode, the controller signals coming into the "A" and "B" DMX inputs will merge to one output. There are 10 dip switches available so the starting DMX address channel can be set for the controller that is connected into DMX input "B". For example, a stage desk 16 is connected to the DMX input "A", we would patch the controller that is connected to DMX input "B" at channel 17 and also set the binary on the DMX merger to 17.