Anytronics Dimmer Rackmount 6x10A 19" 4U 6xCEE17 Single & 3 Phase

The Series 194 Dimming Packs are 4U high versions of the D610CB, offering a range of socket options on the front panel. They share the same electronics and facilities as the Series 192s with the exception of no on/off switch when level controls are fitted and the mounting of either 8 pin DIN or 5 pin XLR sockets on the front panel dependent on model, although cut-outs have been provided in the rear of the chassis (complete with blanking caps) in case these sockets are required to be mounted at the rear of the unit. To facilitate triac changing, a plate is fitted to the rear of the Series 194 chassis which is the same size as those found on the rear of the Series 192s and although a blank panel would normally be fitted, we could supply any of the panels used on the Series 192s, allowing sockets both front and rear on the 194 range. 19"x4U Rack mounting format. Fan cooled. Auto detecting + or - analogue control input. Highly flexible input/output connection systems. High inductance chokes. Conservatively rated triacs and heatsinks. Suitable for resistive and inductive loads. Easy to install. Circuit Breaker for channel protection on all models.